Supported boards
NanoGig Screen runs on these off-the-shelf boards. Each gets the same interface laid out for its size; the larger screens get bigger type and more room on each page.
| Board | Display | Touch | Chip | Status |
|---|---|---|---|---|
| ESP32-2432S028 | 2.8" 320×240 | resistive | ESP32 | Tested on a pedal |
| Guition JC4827W543 | 4.3" 480×272 | capacitive | ESP32-S3 | In testing |
| LCDwiki ES3C35P | 3.5" 480×320 | capacitive | ESP32-S3 | Tested on a pedal |
ESP32-2432S028 (Cheap Yellow Display)The original NanoGig Screen board: cheap, widely available, small enough to sit by the pedal.
Guition JC4827W543A wide 4.3" panel with capacitive touch: the largest picture, readable from further away.
LCDwiki ES3C35PA sharp 3.5" panel with capacitive touch, a step up in size from the CYD.
Buying a board
Section titled “Buying a board”These boards are sold by many shops under slightly different names. Match the model number and the display size, and check the photos against the board guide: the same name is sometimes used for boards with a different display or touch controller, which the firmware may not support.
NanoGig is not affiliated with or endorsed by Neural DSP. Nano Cortex is a trademark of Neural DSP Technologies.