Guition JC4827W543
| Board ID | jc4827w543 |
| Display | 4.3”, 480×272, landscape |
| Touch | Capacitive |
| Chip | ESP32-S3 (4 MB flash, 8 MB PSRAM) |
| Status | In testing |
The largest picture of the supported boards: a wide 4.3” panel that is easy to read from further away.
Status
Section titled “Status”A tester’s board runs NanoGig Screen: the picture, colours and the pedal connection work. Touch and which way up the picture is are still being confirmed. If the picture is upside down, use Settings → NanoGig tab → page 2 → Rotate display.
Which version to buy
Section titled “Which version to buy”Look for the model number JC4827W543 from Guition, the capacitive touch version (“C” in some listings), with an ESP32-S3.
Power and cable
Section titled “Power and cable”5 V over its USB-C socket. A USB cable that carries data is also what the web installer needs.
Updates
Section titled “Updates”Over-the-air updates for this board start with the first release that publishes its firmware file. See Updating.
NanoGig is not affiliated with or endorsed by Neural DSP. Nano Cortex is a trademark of Neural DSP Technologies.